Chop Shop 4x4 Off-Road Professional Technicians & Subject Matter Experts

JK Rocker Guards




Collections: Body Armor, Interior/Exterior

Type: Rock Sliders

Vendor: GenRight


Pin It Fancy

Product Description:


  • Lightweight rocker guard for the Jeep JK.
  • Molded to fit the JK's body's shape!
  • "functional" step on the JK.
2 Door JK (steel)
  • 3 piece design is is contoured to the body.
  • Wraps all the way under to the body mounts for durability.
  • Full coverage from front to rear (protects the flares too). 
  • Laser cut and Formed from solid 3/16" steel plate.
  • Works with factory plastic flares too.
  • Sold in pairs (as a kit).
  • Shipped un-painted and requires paint or powder coat after installation.
  • Installation requires minor drilling of the factory mounting locations.
  • Although the formed metal steps provide good foot traction in most conditions, the metal tubing can be slippery when wet, therefore we recommend adding grip tape where necessary for better entry and exit foot traction.
  • Will require trimming about 5/8" off the bottom of the factory flares.
2 Door JK (aluminum)
  • Highest ground clearance on the market (hangs no lower than the body).
  • 3 piece design ties into multiple points for maximum durability.
  • Contoured to fit the shape of the JK's curved body.
  • Wraps all the way under and ties to the body mounts.
  • Full coverage from front to rear (protects the flares too). 
  • Laser Cut and CNC Formed from solid 3/16" Aluminum.
  • Smooth "Boatside" will not get hung up on  trail obstacles!
  • Will work with metal tube flares or the factory plastic flares.
  • Shape design acts as a nice 4" wide step for the vehicle occupants. 
  • Sold in pairs (as a kit).
  • Includes all Stainless mounting hardware.
  • Shipped un-painted and requires paint.
  • Installation requires minor drilling of the "Kick Plate" mounting locations.
  • Although the formed metal steps provide good foot traction in most conditions, the metal tubing can be slippery when wet, therefore we recommend adding grip tape where necessary for better foot traction during entry and exit.
  • If still running the factory plastic flares, these rockers will require trimming about 5/8" off the bottom of the factory flares. 
  • Will not work with body lifts (attaches to the bottom of the body mount bolts).
4 Door JKU (steel)



 

 

 

 

 

  • It was featured in the June 2012 issue of
  • 4 Wheel Drive Magazine where the editor
  • described our JK products as "Amazing"
  • and the "Finest Unlimited on the Planet"!
FEATURES:
  • Highest ground clearance on the market (hangs no lower than the body).
  • 3 piece design ties into multiple points for maximum durability.
  • Contoured to fit the shape of the JK's curved body.
  • Wraps all the way under and ties to the body mounts.
  • Full coverage from front to rear (protects the flares too). 
  • Laser Cut and CNC Formed from solid 3/16" steel plate.
  • Smooth "Boatside" will not get hung up on  trail obstacles!
  • Will work with metal tube flares or the factory plastic flares.
  • Shape design acts as a nice 4" wide step for the vehicle occupants. 
  • Sold in pairs (as a kit).
  • Includes all Stainless mounting hardware.
  • Shipped un-painted and requires paint.
  • Installation requires minor drilling of the factory mounting locations.
  • Although the formed metal steps provide good foot traction in most conditions, the metal tubing can be slippery when wet, therefore we recommend adding grip tape where necessary for better foot traction during entry and exit.
  • Will require trimming about 5/8" off the bottom of the factory flares.
  • Will not work with body lifts (attaches to the bottom of the body mount bolts).
  • Also available for the 2 door model (RCG-8002).
4 Door JKU (aluminum)
  • Highest ground clearance on the market (hangs no lower than the body).
  • 3 piece design ties into multiple points for maximum durability.
  • Contoured to fit the shape of the JK's curved body.
  • Wraps all the way under and ties to the body mounts.
  • Full coverage from front to rear (protects the flares too). 
  • Laser Cut and CNC Formed from solid 3/16" Aluminum.
  • Smooth "Boatside" will not get hung up on  trail obstacles!
  • Will work with metal tube flares or the factory plastic flares.
  • Shape design acts as a nice 4" wide step for the vehicle occupants. 
  • Sold in pairs (as a kit).
  • Includes all Stainless mounting hardware.
  • Shipped un-painted and requires paint.
  • Installation requires minor drilling of the factory mounting locations.
  • Although the formed metal steps provide good foot traction in most conditions, the metal tubing can be slippery when wet, therefore we recommend adding grip tape where necessary for better foot traction during entry and exit.
  • Will require trimming about 5/8" off the bottom of the factory flares. 
  • Will not work with body lifts (attaches to the bottom of the body mount bolts).
  • Also available for the 2 door model (RCG-8102).

Related Items