Chop Shop 4x4 Off-Road Professional Technicians & Subject Matter Experts

ARB ON-BOARD HIGH PERFORMANCE 12 VOLT TWIN AIR COMPRESSOR





Pin It Fancy

Product Description:


The ideal on board air system for operating your air tools and inflating your tires.

  • Pneumatic supply with electrical control for ARB Air Locker(s). (Required product will be an Air Locker Manifold Kit #171503 )
  • Unsurpassed Rapid inflation of small, medium and large tires.
  • Air tools rated up to 85LPM [3CFM] @ 6Bar [90PSI] continuous supply.
  • Air tools rated higher than 85LPM [3CFM] @ 6Bar [90PSI] using an optional air tank suitable to the run time requirements.
  • Fully assembled and tested air compressor (12V or 24V).
  • Complete wiring loom w/ Air Locker solenoid plug-in terminals.
  • Automotive OEM quality compressor isolating switch. 2 x relocatable splash resistant air filters with washable high-flow sintered bronze filter cartridges.
  • Mounting bolts and washers.
  • Comprehensive photo illustrated installation guide.
  • Constructed primarily of light weight, high strength, engineering grade materials, including military and aerospace standard components.
  • Pressure switch controlled air manifold system regulates pressure between 9.3Bar [135PSI] and 10.3Bar [150PSI] suited to air tools and all ARB Air Locker equipped vehicles.
  • Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
  • High efficiency design consumes only 56 Amps at maximum air flow. Built with sealed components for moisture and dust resistance.
  • Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fiber piston seals for reduced friction and maximum trouble free life.
  • Ducted IP55 sealed brushless DC cooling fan and anodized motor mounting brackets effectively dissipate heat from the motors, heads and electronics allowing for a 100% duty cycle (under room temperature conditions).
  • Anti-vibration / sound deadening is integrated into the mount. Relocatable splash resistant air filter assemblies for cleaner, cooler air supply and versatile waterproof air intake positioning.
  • High density and high flow washable sintered bronze air filter elements.
  • Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
  • Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
  • Motors are water sealed, 100% ball bearing equipped (i.e., no bushings used), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
  • Motors are internally thermal protected against extreme temperature damage.
  • Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Over-pressure safety valve equipped.
  • Sealed illuminated automotive grade dash switch included.
  • Fully serviceable and all replacement parts available.
  • EMF suppressed for use in proximity to sensitive electronic equipment.
  • CE and C-Tick compliant.
  • Engineered, built, and individually dyno-tested in Australia from local and imported components.
" height="315" frameborder="0" allowfullscreen="">" height="315" frameborder="0" allowfullscreen="">" height="315" frameborder="0" allowfullscreen="">" frameborder="0" allowfullscreen="">


 


Related Items